- Building Material Making Machinery Parts[6]
- Metallurgy Machinery Parts[4]
- Hydraulic Tools[4]
- Cylinders[4]
- Hydraulic Parts[10]
- Generator Parts & Accessories[4]
- Electricity Generation[7]
- Pumps[7]
- Oil Filter[5]
- Other Industrial Filtration Equipment[5]
- Heat Exchanger[7]
- Other Machinery[1]
- Testing Equipment[1]
- Waste Management[2]
- Oil Purifier[2]
- Speed Reducers[3]
- Gearboxes[1]
- Boilers[6]
- Boiler Parts[3]
- Power Accessories[4]
- Pressure Vessels[7]
- Contact Person : Mr. Chen David
- Company Name : Sichuan CRUN Co., Ltd.
- Tel : 0086-28-61836262
- Fax : 0086-28-61836323
- Address : Sichuan,Chengdu,No.85, Gangbei 6th Road, North Section of Modern Industrial Park, Chengdu City, P.R.China
- Country/Region : China
- Zip : 611743
Listed Company CRUN/TRT Thin Oil Lubrication System
TRT series thin oil lubrication system is mainly applied to the thin oil lubrication system of the equipments in steel industry and metallurgy, which supplies lubrication oil for the blower, reducer and motor bearings, major pump of Turbine.
The equipment is composed of oil tank, oil pump, oil cooler, valves, filter, pipes and instrument panel and so on.
Equipped with two main pumps, one works and the other is for spare.
Not need to stop machine while changing and cleaning filtering mesh for use of duplex tank mesh filter. And it will automatically alarm when the mesh is blocked.
-Magnetic oil return filter can absorb 99% magnetic material.
The pressure reducing valve of oil supply system can insure constant pressure when changing of low.
There is a manhole on the oil tank which is convenient to check and clean.
There are level sensor, oil leveler, electrical contacts and bimetal thermometer, air purifier, sampling valves, oil drainage valve an so on.
Thin oil lubrication equipment, electrical control panel and instrument panel are interlocked with center control of the host machine. Therefore, full automatic operation management without man can be achieved.
Oil is drawn out by oil pump from oil tank and goes through shut-off valve, filter, oil cooler, duplex tank mesh filter, then directly sent to lubrication points and the main turbine pump. The oil pressure is adjusted by an oil pressure adjusting valve according to the requirements of the lubrication points. When the working pressure exceeds the regulated pressure, the oil pressure adjusting valve will open automatically, and the overflowed oil will flow back into the oil tank.
Ambient Conditions:
Elevation: ≤1,000 meters
Power: Three-phase four-wire system AC380V/220V
Fluctuations≤10%;50Hz, Fluctuations≤1%
Ambient Temperature: (0-40)°C (Humidity: 60%-90%)
No vibration, corrosive gas, fire, explosion, and non-outdoor service
Listed Company CRUN/TRT Thin Oil Lubrication System
